1. Restricted by structural conditions, this structure is not suitable for valves with a diameter below DN200, because the overall structure of the valve plate is too thick and the flow resistance is large.

2. Since the multi-layer soft and hard stacked sealing ring is fixed on the valve plate, when the valve plate is normally open, the medium will wash its sealing surface positively, and the soft sealing band in the metal sheet sandwich will directly affect the sealing performance after being washed.
3. Due to the principle of fluorine-lined butterfly valve, the sealing between the sealing surface of the valve plate and the valve seat is to press the valve plate against the valve seat by the torque of the transmission device. In the positive flow state, the higher the medium pressure, the tighter the sealing extrusion. When the flow channel medium flows back, as the medium pressure increases, the unit positive pressure between the valve plate and the valve seat is less than the medium pressure, the seal begins to leak.